XLH XinleHong 9125 Upgrade Kit-Alloy Metal Version-Red

Product details:

Parts Name: Upgrade Metal Kit

Package list: 1Set/Lot

Material: Aluminum Alloy

Color: Red

Included accessories：

1. Upgrade Metal Front Streening Cup (Left+Right) 1Set

2. Upgrade Metal Front Upper Arm 2Pcs

3. Upgrade Metal Front Lower Arm 2Pcs

4. Upgrade Metal Steering LInkage 2Pcs

5. Upgrade Metal Rear Cup 2Pcs

6. Upgrade Metal Rear Upper Arm 2Pcs

7. Upgrade Metal Rear Lower Arm 2Pcs

Matching screws, iron bars, ball head.

Applicable to XinLeHong Toys 9125 1:10 High-Speed ​​RC Racing Car.

How to install the 9125 upgrade metal kit?

Please see the following instructions：

Front Kit：

1. We have provided the screws needed for installation in the kit.

If some parts do not have matching screws, then you only need to use the original screws.

Please refer to the following figure for the corresponding installation position of each screw:

2. Steering connecting rod:

Before installation, please compare the connecting rod with the original connecting rod and adjust them to the same length.

the 2.5*15mm screws we provide above are for metal connecting rods.

 
and are not suitable for original plastic connecting rods.

If you are using original plastic connecting rods, you only need to use the original screws to install them.

About bearings:

1. The front steering cup is the same as the rear cup. Use original bearings, the matching parts do not have matching bearings. If you need bearings, please click here to buy: 15-WJ09 bearing

2. If you cannot install the bearing directly into the slot, you can put a piece of cloth on the bearing and then tap it gently with a tool.

The bearing must be installed safely into the slot, otherwise the entire rotating shaft and swing arm cannot be installed smoothly.

When installing, please note:

• The swing arm is curved, please observe it carefully before installation to avoid installation errors.
• During installation, we recommend that you do not remove both at the same time. Install one side first, and then remove the other side so that you can refer to it during installation.
• Assemble it according to the picture above and install it on the car , it will be much simpler.

Rear Kit:

1. The screws required for installation are included in the kit.

2. Please use original bearings.

3. The swing arm is curved. When installing, you can install one side and then remove the other side, so as not to refer to when you do not know how to install,

As shown in the picture, assemble the components first and then install them on the car, which will be much easier.

5. When installing, please make sure that the bearing is installed in place. If the bearing is not installed in place, the dogbone cannot be installed properly or the entire wheel cannot be balanced.

Because the metal cup is made of metal, if the bearing is difficult to install, please place the bearing on the installation hole, put a piece of cloth on it, and tap it gently with a tool.

The metal shock absorber frame is very simple, please refer to the original car installation,

Some screws of the metal shock absorber frame are not matched, just use the original car screws to install,

After the whole set is installed correctly, as shown in the picture, the four wheels are parallel.

How to install the metal connecting rod?

please click here to view: Metal connecting rod installation tutorial

Please note:

1. Due to different batches, each part is produced in batches. Sometimes due to different batches, the color of the product will be different, and it is impossible to

achieve 100% consistency in the same package. If you are a perfectionist, please do not buy it.

2. The colors displayed on different screens will be different. All items are subject to the actual product received.

3. Under correct circumstances, we will send the products in stock in time. If we encounter problems that need to be transferred, we will allocate them in time and send

them as soon as possible.

4. Since its launch, the sales volume of Xinlehong 9125 has been very high and it is deeply loved by car model enthusiasts, so there are many customized versions. 

What is a customized version?

 It is a customized version for the factory by other brands. 

The car is the same and is also produced by Xinlehong factory, but the packaging and brand are changed. 

Of course, we cannot guarantee that all customized versions can be used universally. 

The only way is that you can take the manual of your car and compare the accessory number with the accessory number of the original accessories sold in our store. If they are the same, it means that the car is exactly the same. 

If you have any questions, please contact us through our email and we will reply to you as soon as possible. Please do not leave messages on our website because the message function is temporarily unavailable.